DiagMaster
Black Friday

Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG GT100 And ECU GPT Boot AD ECU Connector for ECU Reading Writing

BrandGODIAGItem No. DC-GDG-ECU-000077Physical product

Xhorse Multi-PROG programmer bundled with GODIAG GT100 and the ECU GPT Boot AD connector for supported ECU/TCU data operations, OBDII communication testing, and Bench/Boot connections. Multi-PROG provides reading, writing, cloning, chip programming, BMW ISN functions, and a built-in free MQB48 license.

€810€899
In Stock
Quantity
1

Delivery & shipping options

Standard delivery
Free
Dispatch from
EU
Total incl. shipping:
€810
Estimated delivery
8–15 Working Days

Overview

This bundle includes the Xhorse XDMPG0GL Multi-PROG ECU/TCU programmer, GODIAG GT100 OBDII breakout box, and GODIAG ECU GPT Boot AD connector. Multi-PROG handles supported ECU/TCU data reading, writing, and cloning, EEPROM/MCU operations, and batch chip programming. GT100 provides communication detection, single- or multiple-module connections, and connection support for diagnostics, programming, and coding with compatible tools. The GPT Boot AD supports OBD2 Bench and GPT Bench access without opening supported ECUs, plus Boot operations with the ECU opened. Application-specific adapters and software support are required for the corresponding functions.

Package list
Package contents for the selected product option, part 1 of 2
ItemQty
Multi-PROG1
USB Cable1
Power Adapter (15V 4A)1
220V Power Cord1
VH13 Interface Adapter Board1
VH20 Interface Adapter Board1
VH23 Interface Adapter Board1
MCU Adapter Multi-PROG Solder Cable1
MCU DB15 Adapter Cable1
ECU Adapter Multi-PROG Solder Cable1
ECU DB15 Adapter Cable1
Multi-PROG OBD Cable1
USB WIFI Network Card1
Package contents for the selected product option, part 2 of 2
ItemQty
Product Manual1
Certificate Of Conformity1
ECU Cable Plugs43
GT100Host1
OBD 2-in-1 extension cable1
Colored jumper cable1
Power supply 12V1
Resistance 120 ohm1
Banana plug6
Wire accessories Dupont 2.54mm connector female pins24
GODIAG ECU GPT Boot AD Programming Adapter1
OBD2 to DB25 Cable1
Soft Silicone Wires8

Description

Xhorse Multi-PROG ECU/TCU Programmer with GODIAG GT100 & ECU GPT Boot AD

This bundle includes the Xhorse XDMPG0GL Multi-PROG ECU/TCU programmer, GODIAG GT100 OBDII breakout box, and GODIAG ECU GPT Boot AD connector. Multi-PROG handles supported ECU/TCU data reading, writing, and cloning, EEPROM/MCU operations, and batch chip programming. GT100 provides communication detection, single- or multiple-module connections, and connection support for diagnostics, programming, and coding with compatible tools. The GPT Boot AD supports OBD2 Bench and GPT Bench access without opening supported ECUs, plus Boot operations with the ECU opened. Application-specific adapters and software support are required for the corresponding functions.

Bundle Configuration

  • Xhorse Multi-PROG ECU/TCU Programmer — XDMPG0GL.
  • GODIAG GT100 OBDII Protocol Detector / Breakout Box ECU Connector.
  • GODIAG ECU GPT Boot AD ECU Connector.

Note: This configuration lists the three main components above. Additional test platforms, programming devices, and application-specific adapter sets mentioned below are compatibility options, not additional bundled sets.


Product Features

  • Read, write, and clone supported engine ECU and gearbox TCU data.
  • EEPROM and MCU data operations with chip verification, blank checking, and file comparison.
  • Factory / Expert batch chip programming, offline programming, and file-based offline programming.
  • Built-in free MQB48 license and BMW bench ISN reading functions.
  • Checksum correction and data calculation for supported ECU applications.
  • GT100 OBDII communication detection and single- or multiple-ECU connections.
  • GT100 OBD1-to-OBD2 connection conversion, banana plug access, and diagnostic cable extension.
  • GT100 auxiliary vehicle power connection during battery replacement.
  • GPT Boot AD OBD2 Bench, GPT Bench, and Boot connection options.
  • GPT Boot AD manual / PCMFlash automatic ignition control, selectable 120Ω CANbus resistor, and labeled ECU connections.
  • Free Multi-PROG software and firmware updates.

Note: Functions depend on the supported ECU, TCU, or chip, the selected adapter configuration, and compatible diagnostic or programming equipment. GT100 and GPT Boot AD provide connection support; they do not independently perform the listed programming operations.


Xhorse Multi-PROG Programmer

The XDMPG0GL Multi-PROG accesses and modifies supported ECU and TCU data, including engine maps, transmission parameters, and immobilizer settings.


ECU, TCU & ISN Functions

  • Read, write, and clone supported engine ECU and gearbox TCU data.
  • Read EEPROM, ECU, and MCU data.
  • BMW bench ISN reading.
  • Read and write BMW N20 / N55 ECUs with direct ISN display.
  • Bosch ECU ISN reading and writing with the required Bosch ECU adapter.
  • Checksum correction for selected EDC16 / EDC17 ECUs.
  • EDC17 / MED17 data calculation and checksum correction for supported applications.

Chip Programming & Data Processing

  • Factory mode and Expert mode for batch chip programming.
  • Offline programming and file-based offline programming.
  • Chip data verification and blank checking.
  • Data file comparison.
  • Free dump-based PIN code calculation for supported models.
  • Support for third-party automatic HEX editing scripts.

Supported Chip Families

  • MC9S08; MC68HC(9)12; MC9S12.
  • V850; H8X; R8C; PCF79XX.
  • Most EEPROM chips.
  • MC9S12XE examples: 5M48H, 1N35H, 2M53J, and 3M25J.
  • Ongoing chip support updates, including NEC, MPC, and Infineon.

Additional Applications

  • Renew supported BMW E/F-series PCF79XX remotes using the optional PCF79XX adapter.
  • Supported repair functions for Porsche 12V lithium batteries and BYD lithium batteries (MC9S12XET256).
  • Connection diagram database.
  • Reserved ports for future expansion.


MQB48 License & Expansion Adapters

MQB48 NEC35XX

Multi-PROG includes a built-in free MQB48 license. Bind Multi-PROG and a compatible VVDI2 full version or Key Tool Plus to the same Xhorse app account for the supported MQB48 NEC35XX workflow.

Note: Use the applicable Xhorse account-binding and device workflow for MQB48 operations.

Application-Specific Adapters

  • VAG MQB RH850 dashboard processor support requires the Xhorse XDMPR8GL MQB-RH850/V850 adapter, sold separately.
  • Compatible with the Xhorse XDNPM3GL MQB48 solder-free 13-piece adapter set.
  • Works with VH24, VH29, VH30, and VH31 Multi-PROG exclusive adapters to extend chip reading and writing.
  • PCF79XX remote renewal requires the optional PCF79XX adapter.
  • Bosch ECU ISN operations require the corresponding Bosch ECU adapter.

Note: Check the adapter requirements for the intended operation. The expansion adapter sets above are compatibility options and are not listed as additional bundled sets in the supplied three-component configuration.



GODIAG GT100 OBDII Breakout Box

GT100 provides OBDII communication detection and connection support for ECU maintenance, diagnosis, programming, and coding with compatible tools.

Connections & Testing

  • Connect a single ECU or multiple vehicle ECU modules for supported diagnostic and programming work.
  • Extend the vehicle OBDII 16-pin interface through banana plug connections for interface checks and voltage waveform testing with suitable test equipment.
  • Convert an OBD1 diagnostic interface to a standard OBD2 connection using the appropriate connector and matching communication protocol.
  • Extend the diagnostic connection where access is restricted or the existing cable is too short.
  • Provide an auxiliary power connection to the vehicle during battery replacement using a suitable external power source.

Dashboard / IMMO & BMW Platform Applications

  • Helps activate supported VW, Porsche, Mitsubishi, and Toyota dashboard or IMMO modules before key programming in all-keys-lost workflows using a compatible tool, such as Autel IM608.
  • Works with BMW CAS4 / CAS4+ test platforms and compatible tools such as VVDI2, Lonsdor K518, CGDI, or Autel IM608 for supported bench key programming, all-keys-lost, and add-key operations.
  • Works with a BMW FEM / BDC test platform for supported FEM / BDC key programming.
  • Compatible tool examples include Xhorse VVDI2, Xhorse Multi-PROG, Autel, Launch, Vident, and CGDI equipment, subject to the intended operation.

Note: Dashboard activation is a preparatory connection function. Key programming requires the appropriate external programmer and, where specified, the matching BMW test platform. Those platforms and external devices are not included in this three-component bundle.


GODIAG ECU GPT Boot AD Connector

ECU Access Modes

  • OBD2 Bench / GPT Bench: supported ECU reading and writing without opening the ECU casing.
  • Boot mode: supported ECU reading and writing with the ECU opened.
  • ECU connection conversion to OBD2 mode for supported data operations.
  • Use with compatible J2534 interfaces and PCMFlash software.
  • Diagnostic connection support for standard OBD2 protocol equipment.

Hardware & Control Features

  • BOOT resistor board connection cable with short-circuit protection to help protect the ECU.
  • Anti-loss resistor board connection cable design.
  • Connections for RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, and GND.
  • PCMFlash automatic ignition power control.
  • Manual ignition power control.
  • Selectable 120Ω CANbus resistor switch.
  • Dedicated ECU connection terminals.
  • Labeled ECU interface cable.

Notice: The GODIAG ECU GPT Boot AD cannot be used alone. Use it with compatible ECU tools and the required software / connection setup. A J2534 interface or PCMFlash license is not listed among the three bundled components.

PCMFlash Interface Notes

  • The stated Scanmatik 2 PRO setup provides the GPT1 / GPT2 signals needed for the described PCMFlash Module 71 workflow.
  • Other listed interfaces include Tactrix Openport 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), and Mazda VCM 2 for supported OBD2 or PCMFlash Module 53 Boot operations.

Note: Interface compatibility is specific to the PCMFlash module and ECU. Scanmatik lists Scanmatik 2 / Pro / 3 for Module 71. Use the interface and ECU connection specified by the current PCMFlash instructions; the other listed interfaces should not be assumed to provide Module 71 GPT signals.


Software Updates & Service

  • Multi-PROG software and firmware updates are listed as free.
  • GT100 warranty: one year.


Product Specifications

Bundle & Multi-PROG

  • Programmer: Xhorse Multi-PROG.
  • Programmer model: XDMPG0GL.
  • Main bundle components: Multi-PROG, GODIAG GT100, and GODIAG ECU GPT Boot AD.
  • Programming targets: supported ECUs, gearbox TCUs, EEPROMs, and MCUs.
  • Data operations: reading, writing, and supported ECU / TCU cloning.
  • Chip programming modes: factory / Expert batch programming, offline programming, and file-based offline programming.
  • MQB48: built-in free license; same-account binding with compatible VVDI2 full version or Key Tool Plus for the stated NEC35XX workflow.
  • ISN: BMW bench ISN reading; BMW N20 / N55 ISN display; Bosch ECU ISN read/write with the required adapter.
  • Chip families: MC9S08, MC68HC(9)12, MC9S12, V850, H8X, R8C, PCF79XX, and most EEPROM chips.
  • MC9S12XE examples: 5M48H / 1N35H / 2M53J / 3M25J.
  • Data checks: verification, blank check, file comparison, selected checksum correction, and supported dump-based PIN calculation.
  • Script support: third-party automatic HEX editing scripts.

GT100

  • Product type: OBDII protocol detector / breakout box ECU connector.
  • Interface access: OBDII 16-pin / banana plug extension connection.
  • Module connections: single or multiple ECU modules.
  • Additional connections: protocol-dependent OBD1-to-OBD2 conversion, diagnostic cable extension, and auxiliary vehicle power connection.
  • BMW platform compatibility: CAS4 / CAS4+ and FEM / BDC test platforms for supported operations with compatible tools.
  • Warranty: one year.

ECU GPT Boot AD

  • Connection modes: OBD2 Bench / GPT Bench / Boot, subject to ECU support.
  • Connections: RESET / BOOT / CNF1 / GPT1 / GPT2 / 5V / 3.3V / VPP / GND.
  • Ignition control: manual control and PCMFlash automatic control.
  • CANbus termination: switch-selectable 120Ω resistor.
  • BOOT connection: resistor board cable with short-circuit protection and anti-loss design.
  • ECU interface: dedicated connection terminals and labeled cable.
  • Compatible setup: supported J2534 interfaces with the appropriate PCMFlash module; adapter cannot operate alone.

Note: The 5V / 3.3V entries above are named GPT adapter connections, not the input power rating of the bundle. Application-specific adapters and external tools are required where stated.


Product FAQ

Ask a question

No product questions have been published yet. Need to check something before buying? Ask our team.

Customer reviews

Highest rated first

No reviews yet.

Chat with us