
OBDSTAR ECU MASTER Configuration A ECU & TCU Programmer
OBDSTAR ECU MASTER Configuration A is a Windows PC-based programmer for passenger-car ECU repair and module replacement. It provides control-unit-specific reading, writing, cloning and immobilizer-data processing for supported ECM, TCM and BCM applications, with selected EV BMS/VCU coverage. Connection modes and required adapters depend on the selected controller and operation.
Delivery & shipping options
- Standard delivery
- Free
- Dispatch from
- EU
- Total incl. shipping:
- €1,260
- Estimated delivery
- 8–15 Working Days
- Returns
- 30 days from delivery
Frequently Bought Together
ECU Series
OBDSTAR DC706 ECU Tool Full Version Plus P003+ Adapter
CG FC200 Full Version ECU and TCU Programmer
CGDI ECU Connecting Board DME
CGDI FC200 B48/B58 Unlock Adapter Programming
CG FC200 Full with Adapter Set and MPC5XX
Xhorse Multi-PROG Multi Prog With GODIAG GT100 And ECU Connector
OBDSTAR DC706 ECU Tool Full Version with MP001
ECU Bracket
FormulaFlash ECU TCU Programmer
Overview
Overview
PC-based programmer for supported ECU and TCU operations; requires Windows 10 or later. Available functions and connection modes depend on the exact controller and Configuration A coverage. OBDSTAR includes 12 months of software updates and downloads from registration and activation. Previously downloaded software continues to work after expiry.
Specifications
| Operating System | Windows 10 or later |
|---|---|
| CPU | STM32H723, STM32F407 |
| R/W Mode | OBD, BENCH, BOOT, J-TAG/BDM |
| Working Voltage | DC14V/24V |
| Working temperature | -10°C to 55°C |
|---|---|
| Storage Temperature | -20°C to 70°C |
| Protocol | CAN(ISO 11898), J1708, ISO 15765, SAE J1939, ISO 9141, ISO 14230(KWP2000), SAE J1850, etc |
Package list
| Item | Qty |
|---|---|
| ECU MASTER host | 1 |
| M001C | 1 |
| C4-10 | 1 |
| Charger(14V 4.28A) | 1 |
| Power cable | 1 |
| USB cable | 1 |
| 3-in-1 jumper cable | 1 |
| J-A jumper | 4 |
| J-B jumper | 9 |
| J-C jumper | 7 |
| Item | Qty |
|---|---|
| J-D jumper | 8 |
| J-E jumper | 8 |
| J-F jumper | 4 |
| J-N jumper | 6 |
| J-O jumper | 4 |
| W004 | 1 |
| W005 | 1 |
| W006 | 1 |
| BENCH-C-V1 | 1 |
Description
Description
Passenger-Car Module Repair and Replacement
Use ECU MASTER Configuration A for the specific ECU and module-data operations offered by the selected passenger-car protocol. Its applications include engine-controller replacement, transmission-controller cloning and supported body-module data work. The software separates reading, writing, data conversion and other service functions rather than treating every data read as a complete clone.
It connects to a compatible Windows computer. The supplied ECU MASTER host is the programming interface; a Windows computer or tablet is not listed in the package.

Note: Vehicle and function coverage is specific to Configuration A and the selected module. Broad wording in the original illustration does not establish support for every vehicle, every function or every connection mode.
Configuration A Coverage
- Passenger car: ECM and TCM.
- Passenger car: body, chassis and other supported control modules.
- EV: supported BMS, VCU and other listed modules.

Note: Motorcycle Configuration B, Heavy Duty Configuration C and Crash Reset Configuration D are separate configurations shown for comparison. They are not included as standard software coverage with Configuration A.
Control-Unit Data Operations
- Read and write supported passenger-car ECM, TCM and body/chassis/other control-unit data.
- Clone supported ECM, TCM, BCM, EV BMS and VCU modules for control-unit replacement.
- Checksum correction, immobilizer-data conversion/decryption and IMMO OFF/ON where the selected module supports them.
- VIN reading/writing, virgin reset and replacement-module data transfer for listed applications.
- Module-specific mileage, ECU runtime and coolant-temperature-sensor calibration functions.
- MAPS reading/writing and ECU lock/unlock where listed in the selected software entry.
Supported workflows include ECU replacement, used-module data adaptation, gearbox control-unit cloning, BCM/BSI data transfer, VIN-related service and listed immobilizer-data operations. OBD, Bench, Boot and JTAG/BDM access depend on the selected control unit and connection instructions.
Listed Passenger-Car Module Applications

Note: Mercedes-Benz FBS4 references here concern TCM data operations. They are not a claim of complete FBS4 key matching or all-keys-lost programming. Series names in this table do not guarantee every hardware or software variant.
Listed EV BMS / VCU References
- GEELY VCU BOSCH VC1-UP008.0 TC275TP
- GEELY VCU BOSCH VC1-UP008.1 TC387QP
- GREATWALL VCU BOSCH VC1-UP008.1 TC387QP
- SAIC VCU BOSCH VCUP8.2 SPC574K
- BYD YANGWANG VCU BOSCH VCU8.5
- AUDI/VOLKSWAGEN/SEAT/SKODA BMS BOSCH INVCON3.3 TC275TP
- AUDI/VOLKSWAGEN/SEAT/SKODA/GEELY BMS BOSCH INVCON2.3 TC1797
Note: These are supported control-unit data/cloning references. They do not establish battery-cell repair, universal battery reset or support for every EV battery system.
Locked Bosch MG1 / MD1 — Specific Software Entries
OBDSTAR published a locked MG1/MD1 update on July 28, 2026. The Configuration A coverage package labelled October 30, 2026 contains the following matching locked-ECU entries in ECM_V33.66. Brands sharing the same model, processor, mode and additional-function fields are grouped below.
For these listed entries, the coverage marks internal Flash/EEPROM reading and writing and checksum support. The additional-function column distinguishes entries with an explicit Unlock ECU function from those listing ISN operations or no separate unlock flag.

Note: This list does not mean that all TC298/TC299 ECUs, all vehicles after 2020 or all firmware versions are supported. The coverage file includes adapter and dedicated-lead reference fields; follow the ECU MASTER software wiring guide for the required setup. Those references do not add accessories to the package list below.
Manufacturer Locked MG1/MD1 Update — July 28, 202
PC Software & Connection Guide
Use Windows 10 or later. The manufacturer describes registration through the ECU MASTER PC software, connection to the host by USB Type-B, and software download through the Upgrade function after activation. Select the exact control unit and follow its wiring and power instructions.
Subscription & Updates
- A complimentary 12-month subscription starts with registration and activation, according to the manufacturer FAQ.
- Renewal is required for continued software updates and downloads after that period.
- The manufacturer states that functions in software already downloaded are not affected when the subscription expires.
Power-Supply Conditions
The selected package lists a 14V / 4.28A adapter. The current manufacturer product specification lists DC14V/24V working voltage; the older store-hosted manual lists DC14V. These are different source statements, and the adapter rating is not the same as the full device-input specification.
Note: Confirm the operating instructions for the supplied hardware and selected ECU before choosing a supply setting. The manufacturer recommends a professional adjustable regulated supply for higher-demand ECU connections and states a maximum of 26V / 5A; this ceiling is not a default voltage setting or the rating of the included adapter.
Specifications
Specifications
| Parameter | Details |
|---|---|
| Operating System | Windows 10 or later |
| CPU | STM32H723, STM32F407 |
| R/W Mode | OBD, BENCH, BOOT, J-TAG/BDM |
| Working Voltage | DC14V/24V |
| Working temperature | -10°C to 55°C |
| Storage Temperature | -20°C to 70°C |
| Protocol | CAN(ISO 11898), J1708, ISO 15765, SAE J1939, ISO 9141, ISO 14230(KWP2000), SAE J1850, etc |
Product FAQ
Ask a questionWhat does OBDSTAR ECU MASTER Configuration A cover?
Configuration A is the passenger-car ECU configuration, covering supported ECM, TCM and BCM applications and selected EV BMS/VCU modules. Motorcycle ECM, heavy-duty ECU and crash-reset coverage belong to separate configurations; they are not automatically included with Configuration A.
Can ECU MASTER Configuration A clone Audi or Volkswagen Bosch MED17.1 ECUs?
OBDSTAR lists Bosch MED17.1 TC1796 for Audi and Volkswagen with Bench/Boot coverage, including internal Flash and EEPROM read/write, IMMO-data reading and decryption, and internal EEPROM data conversion for cloning. Follow the applicable protocol and adapter requirements. This is a specific data-processing workflow, not a promise that any readable ECU can be cloned by copying its files directly.
Does ECU MASTER support BMW 8HP GEN3 TCM cloning?
Yes. OBDSTAR lists BMW ZF 8HP GEN3 TC275 and TC277 transmission controllers for Bench cloning. Select the matching controller and use its specified connection hardware and procedure; support for these entries does not establish coverage for every BMW gearbox controller.
Can ECU MASTER perform Mercedes-Benz TCM virgin reset and personalization?
Yes, for listed controllers. For example, VGS2-NAG2 and VGS3-NAG2 entries include Bench-mode virgin reset, personalization/data transfer and VIN writing. Other Mercedes-Benz FBS3/FBS4 modules have their own supported operations and connection requirements, so these functions must be matched to the exact controller.
Does Configuration A support every electric-vehicle BMS or VCU?
No. ECU MASTER Configuration A has selected EV module coverage. Listed examples include Volkswagen/Audi Bosch INVCON2.3 TC1797 and INVCON3.3 TC275TP Bench-cloning applications. These entries specify MP001 connection hardware; they do not establish support for every electric-vehicle BMS or VCU.
Does OBDSTAR ECU MASTER require a Windows computer?
Yes. ECU MASTER is operated through Windows PC software and supports Windows 10 or later. Connect the interface to the computer by USB, register and activate the device, then download the applicable software through the Upgrade section.
Will ECU MASTER stop working when the subscription expires?
OBDSTAR provides a 12-month subscription after registration and activation. The subscription relates to software updates and downloads. OBDSTAR states that expiry does not affect the existing functions of software already downloaded.
Does ECU MASTER need an external power supply for Bench programming?
OBDSTAR recommends a professional adjustable regulated power supply when connecting ECU MASTER to an ECU. Set the voltage according to the operating guide for the selected controller. The interface supply limit must not be used as a universal ECU voltage setting.
Customer reviews
Highest rated firstNo reviews yet.

