DiagMaster
EU ShipFree Shipping

Newest GT107 DSG Gearbox Adapter with GT105 II IMMO Prog AD For DQ250, DQ200, VL381, VL300, DQ500, DL501, Benz, BMW

BrandGODIAGItem No. DC-GDG-ECU-000041Physical product

This set combines the GODIAG GT107 DSG gearbox connection adapter with the GT105 II ECU IMMO programming adapter. It provides connection and power support for compatible PCMFlash, PCMTuner, and Kess V2 workflows for supported gearbox ECU reading, writing, data adjustment, cloning, diagnosis, and repair tasks. GT107 offers Auto / Manual ignition selection; GT105 II adds voltage display, CR2032 testing, and a below-11V battery warning.

€41€45
In Stock
Quantity
1

Delivery & shipping options

Standard delivery
Free
Dispatch from
EU
Total incl. shipping:
€41
Estimated delivery
8–15 Working Days

Overview

GT107 connects supported gearbox ECUs to compatible programming equipment, with Auto mode described for PCMFlash reading/writing and Manual mode for diagnosis and the listed Kess V2 applications. GT105 II supplies the accompanying ECU/IMMO connection and vehicle-battery power access, plus Toyota steering angle matching support and Lamborghini ID48 IMMO auxiliary activation. The connection list and operation codes are retained below. The full-protocol OBD2 ECU programming jumper is a separate purchase.

Specifications

Specification summary, part 1
Programming software/equipment namedPCMFlash; PCMTuner; Kess V2
PCMFlash reading/writing exampleAuto mode
Kess V2 gearbox examplesDQ200; DQ250; DQ500; Manual mode
PCMFlash / PCMTuner example supplyDC 12V 2A; alternative supplied setup uses vehicle battery
Specification summary, part 2
GT105 II remote battery testCR2032
Low-voltage alarmBelow 11V
Added auxiliary functionsToyota steering angle matching; Lamborghini ID48 IMMO auxiliary activation
Communication indicationVPW; CANH; CANL; K-Line

Showing 8 of 10 specifications

Package list
Package contents for the selected product option, part 1 of 2
ItemQty
GODIAG GT105 II ECU IMMO Prog AD1
DSG Adapter1
Package contents for the selected product option, part 2 of 2
ItemQty
Power Cord with Battery Clip1
Probe1

Description

GODIAG GT107 DSG Gearbox Adapter with GT105 II IMMO Prog AD

This set combines the GODIAG GT107 DSG gearbox connection adapter with the GT105 II ECU IMMO programming adapter. It provides connection and power support for compatible PCMFlash, PCMTuner, and Kess V2 workflows for supported gearbox ECU reading, writing, data adjustment, cloning, diagnosis, and repair tasks. GT107 offers Auto / Manual ignition selection; GT105 II adds voltage display, CR2032 testing, and a below-11V battery warning.

Set Components and Functions

  • GT107 DSG gearbox adapter: connection support for the listed gearbox ECUs and compatible programming tools.
  • GT105 II ECU IMMO Prog AD: accompanying ECU/IMMO connection, communication indication, and power access.
  • Software / equipment named: PCMFlash, PCMTuner, and Kess V2.

Note: These adapters provide connections and power access. ECU operations depend on the target module, required connection method, programming equipment, and software support. This product is GT107 with GT105 II, not GT107+.

GT107 Auto / Manual Selection

  • Switch released: Auto mode.
  • Switch pressed down: Manual mode.
  • PCMFlash data reading/writing: select Auto as described in the supplied setup.
  • Diagnosis: select Manual.
  • Kess V2 with DQ200, DQ250, or DQ500: use Manual ignition mode as described.

Note: Select the corresponding mode in the programming software and follow its ignition prompts. The supplied examples do not establish identical mode requirements for every ECU or software configuration.

Gearbox Connections Listed

  • Renault DCO/DC4 Gen2 β€” Not specified
  • Honda LUK UDCT β€” Not specified
  • DQ200 (0AM) β€” WR/CK
  • DQ250C (02E) β€” RD/WR/CK
  • DQ250E/F (02E) β€” WR/CK
  • DQ200 MQB/G2 (0CW) β€” WR/CK
  • DQ250 MQB (0D9) β€” WR/CK
  • VL300/V30 (01J/0AN) β€” WR/CK
  • VL381 (0AW) β€” WR/CK
  • DL501/G2 (0B5) β€” WR/CK
  • DQ500 (0BH/0BT) β€” RD/WR/CK; reading with direct connection
  • DQ200/MQB/G2 Boot (MICRO) β€” RD/WR/CK
  • DQ200/MQB/G2 Boot (EEPROM) β€” RD/WR
  • DQ250E/F/MQB Boot (MICRO) β€” RD/WR/CK
  • DQ250E/F/MQB Boot (EEPROM) β€” RD/WR
  • VL300/V30 BSL (FLASH) β€” RD/WR/CK
  • VL300/V30 BSL (EEPROM) β€” RD/WR/CK
  • VL381 Boot (MICRO) β€” RD/WR/CK
  • VL381 Boot (EEPROM) β€” RD/WR
  • DL501/G2 Boot (MICRO) β€” RD/WR/CK
  • DL501/G2 Boot (EEPROM) β€” RD/WR

Note: RD/WR/CK codes are retained as supplied; their definitions are not provided in the source text. No operation codes were supplied for Renault DCO/DC4 Gen2 or Honda LUK UDCT. The DQ500 entry specifies direct connection for reading.

PCMFlash / PCMTuner Setup

  1. Connect GT107 to the relevant DQ250, DQ200, VL381, VL300, DQ500, or DL501 gearbox ECU.
  2. Connect the ECU IMMO Prog AD and the DC 12V 2A power supply stated for this setup.
  3. Leave the GT107 ignition switch released for Auto, unless the matching procedure requires otherwise.
  4. Connect the PCMFlash / PCMTuner J2534 passthrough equipment.
  5. Connect the computer, open the software, and select the corresponding Auto mode.

The supplied vehicle-battery setup follows the same listed ECU and equipment connections, using the vehicle battery instead of the stated external supply.

Kess V2 Setup: DQ200 / DQ250 / DQ500

  1. Connect GT107 to DQ250, DQ200, or DQ500 as required.
  2. Connect the ECU IMMO Prog AD to the vehicle battery or a 12V 3A power supply.
  3. Connect Kess V2 and press the GT107 switch down for Manual ignition mode.
  4. Connect the computer and open the software.

Note: The 12V 2A and 12V 3A values belong to different supplied setup examples. They are not presented as adapter output ratings or as one universal supply specification.

Five Added GT105 II Functions

  • Vehicle voltage display.
  • CR2032 remote-control battery testing.
  • Vehicle battery voltage warning below 11V.
  • Toyota steering angle matching support.
  • Lamborghini ID48 key IMMO auxiliary activation.

GT105 II Communication and Power Features

  • Communication indicators: VPW, CANH, CANL, and K-Line activity indication.
  • Vehicle-battery power access: obtain 12V for compatible outdoor programming equipment and 12V-powered key cutters.
  • Equipment examples: Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, and IM608.
  • Battery power cable: 0.75 mmΒ² two-core sheathed cable.
  • DC connector sizes stated: 5.5 Γ— 2.5 mm / 5.5 Γ— 2.1 mm.
  • DC connector fuse: resettable 7A.
  • Battery clip thickness stated: 0.5 mm.
  • Female contact material: pure copper.
  • Battery replacement power-maintenance connection to help retain vehicle data and settings while an external supply is maintained.

Note: Communication light activity does not by itself confirm a successful programming operation. Battery power-maintenance support is not a guarantee against all setting loss, resets, or faults; the adapter is not described as an independent battery or charger.

GT105 II IMMO Auxiliary Applications

  • Post-2016 Ford smart-key all-keys-lost workflows with compatible VVDI, OBDSTAR, AUTEL, or other IMMO matching equipment.
  • Instrument or IMMO ECU wake-up for the described VAG fourth- and fifth-generation workflows.
  • Toyota ECU synchronization.
  • Auxiliary Mitsubishi all-keys-lost matching or remote-control key settings.
  • IMMO key learning for older Porsche Cayenne applications.

Note: These are auxiliary application examples, not blanket compatibility for all vehicles of each brand or year. The matching equipment performs the supported diagnostic or key programming operations.

Optional Full-Protocol OBD2 Programming Jumper

The supplied description also discusses a full-protocol ECU connection line with independent PIN4 body ground and PIN5 signal ground, selectable linked/separate grounds, and DC / laboratory power connections for compatible module programming.

Note: The full-protocol OBD2 ECU programming line is purchased separately. Its features are not a claim that this jumper is included with the GT107 + GT105 II set.

Original Product Detail Images

Specifications

ParameterDetails
Programming software/equipment namedPCMFlash; PCMTuner; Kess V2
PCMFlash reading/writing exampleAuto mode
Kess V2 gearbox examplesDQ200; DQ250; DQ500; Manual mode
PCMFlash / PCMTuner example supplyDC 12V 2A; alternative supplied setup uses vehicle battery
GT105 II remote battery testCR2032
Low-voltage alarmBelow 11V
Added auxiliary functionsToyota steering angle matching; Lamborghini ID48 IMMO auxiliary activation
Communication indicationVPW; CANH; CANL; K-Line
Resettable fuse7A in DC connector
Battery clip thickness stated0.5 mm

Product FAQ

Ask a question

No product questions have been published yet. Need to check something before buying? Ask our team.

Customer reviews

Highest rated first

No reviews yet.

Chat with us