GODIAG
GT100
€73View details

GODIAG GT100+ / GT100 Pro Breakout Box bundled with the ECU GPT Boot AD connector for voltage/current monitoring, communication checks and supported OBD2 Bench, GPT Bench and Boot ECU connections using compatible external programming equipment.
GT100+ provides OBDII breakout access, voltage/current readings and single- or multiple-ECU connections. The ECU GPT Boot AD adds labeled ECU terminals, manual and PCMFlash automatic ignition control, a selectable 120Ω CANbus resistor and a BOOT resistor board cable. Supported Bench operations can avoid opening the ECU casing; Boot operations require opening it. Compatible external interfaces, programming equipment and software are required.
| Bundle components | GT100+ / GT100 Pro; ECU GPT Boot AD connector |
|---|---|
| GT100+ display | Voltage and current |
| Diagnostic breakout | OBDII; 16-pin |
| ECU interfaces | Banana connectors; dedicated DB25 interface |
| Designated CANbus/K-Line indication pins | 1 / 9 / 3 / 11 / 12 / 13 / 8 |
|---|---|
| OBD2 cable length | Approximately 1.4 m; manufacturer specification |
| GPT Boot AD connection modes | OBD2 Bench; GPT Bench; Boot; ECU-specific |
| ECU casing access | Supported Bench procedures without opening; Boot procedures with ECU opened |
Showing 8 of 16 specifications
| Item | Qty |
|---|---|
| GT100+ Host | 1 |
| OBD 2-in-1 extension cable | 1 |
| Colored jumper cable | 1 |
| Power supply 12V | 1 |
| Resistance 120 ohm | 1 |
| Item | Qty |
|---|---|
| Banana plug | 6 |
| Wire accessories Dupont 2.54mm connector female pins | 24 |
| GODIAG ECU GPT Boot AD Programming Adapter | 1 |
| OBD2 to DB25 Cable | 1 |
| Soft Silicone Wires | 8 |
This bundle includes the GODIAG GT100+ / GT100 Pro OBDII breakout box and GODIAG ECU GPT Boot AD connector. GT100+ provides voltage and current display, communication indication, single- or multiple-ECU connections, diagnostic cable extension, and auxiliary vehicle power connection during battery replacement. The GPT Boot AD supports OBD2 Bench and GPT Bench reading/writing connections without opening supported ECUs, plus Boot operations with the ECU opened. It features manual and PCMFlash automatic ignition control, a selectable 120Ω CANbus resistor, and labeled ECU connections. Diagnostic and programming functions require compatible external equipment and software.

Note: External diagnostic/programming devices, software licenses, and BMW test platforms mentioned below are not listed as bundled components.
Note: This bundle provides testing and connection hardware. Diagnostic, programming, coding, and key-matching operations require the appropriate external equipment, software, and supported vehicle/module configuration.

Voltage & Current Display
Connect an ECU through the banana connectors or dedicated DB25 interface to view its voltage and current. The readings help assess connection status and ECU operating condition.
Communication Indication
GT100+ supports CANbus / K-Line communication indication on the designated non-standard OBD2 pins: 1, 9, 3, 11, 12, 13, and 8.
Note: The CANbus comparison with the original GT100 concerns these designated non-standard pins. It does not mean that the original GT100 has no CAN communication support.
ECU Connections & Interface Access
Dashboard / IMMO & BMW Test Platform Applications
Note: Dashboard activation is a preparatory connection function. The required key programmer and any BMW test platform are separate from this two-component configuration.

ECU Access Modes
Hardware & Control Features
Notice: The GODIAG ECU GPT Boot AD cannot be used alone. Use it with compatible ECU tools and the required software / connection setup. A J2534 interface or PCMFlash license is not listed among the two bundled components.
PCMFlash Interface Notes
Note: Interface compatibility is specific to the PCMFlash module and ECU. Scanmatik lists Scanmatik 2 / Pro / 3 for Module 71. Use the interface and ECU connection specified by the current PCMFlash instructions; the other listed interfaces should not be assumed to provide Module 71 GPT signals.
The supplied compatibility examples include:
Note: Compatibility depends on the selected adapter, ECU, software module, and required connection method. The list does not mean that every listed tool supports every function with both included components.
GT100+ warranty: one year.
Bundle
GT100+ / GT100 Pro
ECU GPT Boot AD
Note: 5V / 3.3V identify named adapter connections, not the input power rating of this bundle. Check exact ECU, interface, and software-module compatibility before selecting the connection setup.

| Parameter | Details |
|---|---|
| Bundle components | GT100+ / GT100 Pro; ECU GPT Boot AD connector |
| GT100+ display | Voltage and current |
| Diagnostic breakout | OBDII; 16-pin |
| ECU interfaces | Banana connectors; dedicated DB25 interface |
| Designated CANbus/K-Line indication pins | 1 / 9 / 3 / 11 / 12 / 13 / 8 |
| OBD2 cable length | Approximately 1.4 m; manufacturer specification |
| GPT Boot AD connection modes | OBD2 Bench; GPT Bench; Boot; ECU-specific |
| ECU casing access | Supported Bench procedures without opening; Boot procedures with ECU opened |
| Ignition power control | Manual; PCMFlash automatic control |
| CANbus termination | Switch-selectable 120Ω resistor |
| Named adapter connections | RESET; BOOT; CNF1; GPT1; GPT2; 5V; 3.3V; VPP; GND |
| BOOT cable | Resistor board cable; short-circuit protection; anti-loss design |
| Included OBD2-to-DB25 cable | 1 |
| Included soft silicone wires | 8 |
| External interface and software | Compatible equipment and software required; licenses not listed as included |
| GT100+ warranty | One year |
The kit includes the GT100+ (GT100 Pro) breakout box, ECU GPT Boot AD connector and the listed accessories, including one OBD2-to-DB25 cable and eight soft silicone wires. External interfaces and software licenses are not included.
Supported OBD2 Bench and GPT Bench procedures can avoid opening the ECU casing. Boot procedures require the ECU to be opened. Choose the connection method specified for the exact ECU and software module.
No. It provides ECU connections and control facilities. Reading or writing requires a compatible external programmer or interface and the appropriate software support.
Do not assume universal J2534 compatibility. Module 71 requires a supported interface and the required GPT signals, wiring and software authorization. Check the exact ECU against the current PCMFlash module documentation.
The current Scanmatik Europe module list names Scanmatik 2/Pro/3 for Module 71. This is not a guarantee for every cable or configuration; confirm the interface, GPT connections and current module instructions.
No external interface or PCMFlash license is listed in this bundle. The GT100 Pro and GPT Boot AD are connection tools; purchase the required interface and software separately.
GODIAG specifies manual ignition control and PCMFlash automatic ignition control. Use the mode required by the supported software, interface and ECU procedure.
The included GT100+ supports voltage and current display through the relevant banana or DB25 ECU connection. Follow the correct wiring for the selected module.
No reviews yet.