
GODIAG GT100 PLUS GPT AUTO TOOL with BMW Test Platform Full Kit for CAS1/ CAS2/ CAS3/ CAS4/ CAS4+ and FEM BDC/ BDC2 BCP/ BDC3 BCP Platforms
GODIAG GT100 PLUS GPT package with six BMW platform types covering supported CAS, FEM/BDC, BDC2/BCP and BDC3/BCP workflows.
Delivery & shipping options
- Standard delivery
- Free
- Dispatch from
- EU
- Total incl. shipping:
- €369
- Estimated delivery
- 8–15 Working Days
- Returns
- 30 days from delivery
Frequently Bought Together
Overview
Overview
Provides bench connections and synchronization checks. Use each platform with suitable diagnostic or key-programming equipment. Check the connection restrictions of each included platform.
Package list
| Item | Qty |
|---|---|
| GODIAG GT100 PLUS GPT Auto Tool | 1 |
| GPT connecting cable | 1 |
| Ethernet cable | 1 |
| OBD 2-in-1 extension cable | 1 |
| Colored jumper cable | 1 |
| Power supply 12V | 1 |
| Resistance 120 ohm | 1 |
| Banana plug | 6 |
| Wire accessories Dupont 2.54mm connector female pins | 24 |
| Manual | 1 |
| Item | Qty |
|---|---|
| GODIAG BMW CAS1/CAS2 Mech-Key Test Platform | 1 |
| OBD2 to DB25 Cable | 1 |
| GODIAG CAS2 CAS3 SER Semi Smart Test Platform | 1 |
| OBD2 to DB25 Cable | 1 |
| GODIAG Test Platform For BMW CAS4 / CAS4+ Programming | 1 |
| GODIAG OBD2 to OBD25 Cable | 1 |
| GODIAG For BMW FEM/ BDC Programming Test Platform | 1 |
| GODIAG OBD2 to BD25 Cable | 1 |
| GODIAG For BMW BDC2/BCP Programming Test Platform | 1 |
| GODIAG For BMW BDC3/BCP Programming Test Platform | 1 |
Description
Description
GODIAG GT100 PLUS GPT Auto Tool with BMW Test Platform Full Kit
For CAS1 / CAS2 / CAS3 / CAS4 / CAS4+, FEM / BDC, BDC2 / BCP, and BDC3 / BCP platforms.
GODIAG GT100 PLUS GPT is a testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming, and coding. The voltage and current display helps maintenance engineers assess the current working status of an ECU.
This bundled package combines the GT100 PLUS GPT Auto Tool with BMW test platforms developed for locksmiths, maintenance engineers, and programming engineers.
Package Contents:
- GODIAG GT100 PLUS GPT Auto Tool
- GODIAG BMW CAS1/CAS2 Mech-Key Test Platform
- GODIAG CAS2 CAS3 SER Semi Smart Test Platform
- GODIAG CAS4/CAS4+ Test Platform
- GODIAG BMW FEM/BDC Test Platform
- GODIAG BDC2/BCP Test Platform
- GODIAG BMW BDC3/BCP Programming Test Platform
GODIAG GT100 PLUS GPT Auto Tool
OBDII Communication and Signal Detection
- Converts the vehicle OBD2 interface into 16 pins for signal detection.
- Checks the communication status of the OBDII diagnostic interface and displays voltage.
- Can be connected to any diagnostic tool to check whether vehicle communication is working.
- Checks whether a diagnostic, programming, or coding tool can send communication signals.
- Pins 1, 9, 3, 11, 12, 13, and 8 correspond to the yellow banana connectors on the device.
- These non-standard OBD2 protocol interfaces may display CAN BUS or K-Line communication protocols.
GT100 PLUS GPT can only display K-Line, PWM, VPW+, and KWP 2000 protocols.
GT100 PLUS GPT will display CAN BUS, K-Line, PWM, VPW+, and KWP 2000 protocol communication.
GPT and DOIP-ENET Functions
- Uses GPT to read and write ECU data with devices such as PCMFLASH and KESSV2.
- Supports DOIP-ENET communication.
- Supports diagnostic programming and coding for BMW, Mercedes-Benz, Volkswagen, Audi, and other vehicles that support the DOIP protocol.
- Can be used for diagnostic programming and coding of Land Rover, Volvo, and Geely vehicles that support DOIP communication.
No software is provided for the DOIP-ENET diagnostic, programming, and coding functions.
ECU Connections and Bench Operation
- Connects to a single ECU module for single-module diagnosis and programming.
- Communicates with a single ECU on the bench when connected to an ECU diagnostic or programming tool, helping avoid data loss in other modules during direct testing on the vehicle.
- Connects multiple vehicle ECU modules when required during module programming, including key programming.
- Activates the instrument or immobilizer module for all-keys-lost key programming on VW, Porsche, Mitsubishi, and other vehicles.
Power Supply and Voltage Conversion
- Converts 24 V from the diagnostic interfaces of heavy trucks, light trucks, pickups, and similar vehicles into 12 V for diagnostic equipment.
- Supplies auxiliary power to the vehicle through GT100 PLUS GPT before and during battery replacement to keep the ECU powered.
- The auxiliary power supply helps avoid control-module data loss, automatic locking, key remote control failure, and fault lights caused by loss of power during battery replacement.
Cables and Diagnostic Port Connections
- The 1.4 m OBD2 cable helps when a diagnostic tool cable is too short or the vehicle diagnostic port is too narrow to connect.
- Connect GT100 PLUS GPT first and turn on its power switch. The screen displays voltage so the vehicle power supply can be checked before connecting diagnostic or programming equipment, helping avoid damage caused by a modified OBD2 port.
- For older OBD1 vehicles or special diagnostic ports, connect through the banana plug and DB25 jumper to adapt the port to a standard OBD2 diagnostic port.
- Converts the OBD1 port of a special truck to a standard OBD2 diagnostic port according to the protocol.
- Uses CANH and CANL shielded twisted cables to resist electromagnetic interference and improve communication stability.
BMW Test Platform Connections
- Works with the GODIAG CAS1/CAS2 Mech-Key Test Platform.
- Works with the GODIAG CAS2 CAS3 SER Semi Smart Test Platform.
- Works with the BMW CAS4/CAS4+ Programming Test Platform to test whether a programmed key works normally with CAS4.
- Works with the BMW FEM/BDC Programming Test Platform.
- Works with the GODIAG BDC2/BCP Test Platform.
- Works with the GODIAG BMW BDC3/BCP Programming Test Platform.
BMW CAS1/CAS2 Mech-Key Test Platform
Developed for BMW locksmiths, maintenance engineers, and CAS1/CAS2 programming engineers.
- Checks whether the CAS1/CAS2 module and mechanical keys are synchronized.
- Works with key programming devices such as Xhorse Key Tool Plus Pad, Xhorse VVDI 2, BMW VVDI BIM Tool, CGDI BMW, and Lonsdor devices for all-keys-lost matching or key addition.
- CAS1/CAS2 module diagnostics.
- CAS1/CAS2 module programming.
Suitable for mechanical keys only. Does not support AUTEL or OBDSTAR devices.
BMW CAS2 CAS3 SER Semi Smart Test Platform
Developed for BMW locksmiths, maintenance engineers, and CAS2 / CAS3 / CAS3+ / CAS3++ programming engineers.
- Checks whether CAS2 / CAS3 / CAS3+ / CAS3++ modules and magnetic semi-intelligent or smart keys are synchronized.
- Works with key programming devices such as Xhorse Key Tool Plus Pad, Xhorse VVDI 2, BMW VVDI BIM Tool, CGDI BMW, and Lonsdor devices for all-keys-lost matching or key addition.
- CAS2 / CAS3 / CAS3+ / CAS3++ module diagnostics.
- CAS2 / CAS3 / CAS3+ / CAS3++ module programming.
Suitable for magnetic semi-intelligent or smart keys. Does not support AUTEL or OBDSTAR devices.

BMW CAS4/CAS4+ Test Platform
- Developed for CAS4/CAS4+ programming engineers.
- Works with GODIAG GT100, CGDI, Xhorse VVDI 2, BMW VVDI BIM Tool, Autel IM608, Yanhua ACDP, Tango, and other devices.
- Supports all-keys-lost operations, adding new keys, synchronization testing, and troubleshooting.
- Easy to use; no PCB required.
- For BMW CAS car models from 2000–2014.

BMW FEM/BDC Test Platform
BMW F-series FEM and BDC key work requires preprocessing of the immobilizer box. The test platform allows work to be completed on the bench, avoiding repeated removal and reinstallation of the control unit in the vehicle.
- Provides an easy connection for the FEM/BDC immobilizer system.
- Performs synchronization tests between programmed FEM/BDC modules and keys.
- Provides a test environment for engineers who professionally recycle FEM/BDC modules.
- Helps maintenance engineers check whether FEM/BDC modules and keys are synchronized correctly.
- Provides connections for FEM/BDC modules and the instrument.

BMW BDC2/BCP Test Platform
Designed for BMW locksmiths, maintenance engineers, and BDC2 programming specialists. Can be used with BMW diagnostic equipment such as C310, ICOM, or GT109, and Autel or Launch tablets that support BMW diagnostics.
- Connects to BDC2 modules using dedicated OEM fast connectors to avoid bent pins or unstable communication.
- Tests communication, detects malfunctions, and verifies key-to-BDC2-module synchronization before reinstallation in the vehicle.
- Supports immobilizer data backup and module replacement.
- Helps replace BDC2 ECUs and diagnose ignition failures by identifying key-to-module mismatches.
- Supports remote diagnosis services: customers can ship FEM/BDC modules to the workshop for key synchronization and testing.
- Includes a DB25 connector, simulated ignition switch, immobilizer dashboard indicator, and key sensing area for testing.
- Compact and portable for workshop or on-site use.
BMW BDC3/BCP Programming Test Platform
- Checks synchronization between keys and modules with real-time feedback.
- When synchronization is achieved, the immobilizer indicator lights up and a sound prompt provides confirmation.
- Performs module programming and coding off the vehicle, reducing the risk of damage to other vehicle modules.
- Supports ENET and CAN BUS communication for BDC3 diagnostics, programming, and coding.
- Tests key remote control functionality and module synchronization.
- The built-in key sensor identification light helps detect key and module identification.
- Tests intelligent key recognition to verify the BDC3 module’s intelligent synchronization function.
- Activates instrument lights for instrument diagnostics, detection, and maintenance.
Under Development
Additional connectors and dedicated modules are under development.
Product FAQ
Ask a questionNo product questions have been published yet. Need to check something before buying? Ask our team.
Customer reviews
Highest rated firstNo reviews yet.

