GODIAG GT100+ OBDII Breakout Box with BMW CAS4/CAS4+ Test Platform
GODIAG GT100+ OBDII Breakout Box with the BMW CAS4/CAS4+ Test Platform for voltage/current monitoring, communication checks and supported bench key-synchronization work using compatible external programming equipment.
Delivery & shipping options
- Standard delivery
- Free
- Dispatch from
- EU
- Total incl. shipping:
- €134
- Estimated delivery
- 8–15 Working Days
- Returns
- 30 days from delivery
Overview
Overview
This bundle pairs the GT100+ breakout box with one BMW CAS4/CAS4+ programming test platform. GT100+ provides ECU connections, voltage/current readings and protocol indication. The CAS4/CAS4+ platform supports bench communication checks, programmed-key synchronization and mismatch troubleshooting. Applicable add-key, all-keys-lost, post-preprocessing backup and module-replacement procedures require compatible external programming tools, software and modules.
Specifications
| GT100+ display | Voltage and current |
|---|---|
| Diagnostic breakout | OBDII; 16-pin |
| ECU connections | Banana connectors; dedicated DB25 interface |
| Designated CANbus/K-Line indication pins | 1 / 9 / 3 / 11 / 12 / 13 / 8 |
| Module connections | Single or multiple ECUs |
|---|---|
| OBD2 cable length | Approximately 1.4 m; manufacturer specification |
| GT100+ operating temperature | −20°C to 70°C (−4°F to 158°F) |
| GT100+ storage temperature | −40°C to 85°C (−40°F to 185°F) |
Showing 8 of 13 specifications
Package list
| Item | Qty |
|---|---|
| GT100+ Host | 1 |
| OBD 2-in-1 extension cable | 1 |
| Colored jumper cable | 1 |
| Power supply 12V | 1 |
| Resistance 120 ohm | 1 |
| Item | Qty |
|---|---|
| Banana plug | 6 |
| Wire accessories Dupont 2.54mm connector female pins | 24 |
| GODIAG Test Platform For BMW CAS4 / CAS4+ Programming | 1 |
| GODIAG OBD2 to OBD25 Cable | 1 |
Description
Description
GODIAG GT100+ with BMW CAS4/CAS4+ Test Platform
This bundle includes the GODIAG GT100+ OBDII Breakout Box and BMW CAS4/CAS4+ Programming Test Platform for ECU connection monitoring and supported bench immobilizer work with compatible external equipment.
GT100+ Voltage and Current Display
Connect the ECU through the banana connectors or dedicated DB25 interface to view voltage and current. These readings help assess wiring and ECU operating condition.

CANbus and K-Line Communication Indication
GT100+ supports CANbus / K-Line indication on the designated non-standard OBD2 pins: 1, 9, 3, 11, 12, 13, and 8.
Note: The designated non-standard pins are the subject of the comparison with the original GT100. This does not mean that the original GT100 has no CAN communication support.
ECU and Diagnostic Connections
- Connect a single ECU or multiple vehicle ECU modules for supported programming and diagnosis.
- Extend the vehicle OBDII 16-pin interface through banana plug connections for interface checks and voltage waveform testing with suitable test equipment.
- Convert an OBD1 diagnostic interface to an OBD2 connection using the appropriate connector and matching communication protocol.
- Extend access where the diagnostic port is restricted or the existing cable is too short. The manufacturer specifies an approximately 1.4 m OBD2 cable.
- Provide an auxiliary vehicle power connection during battery replacement using a suitable external power source.
Dashboard and IMMO Activation Support
Helps activate supported VW, Porsche, Mitsubishi, and Toyota dashboard or IMMO modules before all-keys-lost programming with a compatible external tool, such as Autel IM608.
Note: Dashboard/IMMO activation is a preparatory connection function. Key programming is performed by a compatible external programmer.
BMW CAS4/CAS4+ Bench Test Platform
Used with GT100+ and compatible equipment, the platform provides a bench environment to check whether a programmed key works with the CAS4/CAS4+ module.

The platform is designed for BMW locksmiths, maintenance engineers, and CAS4/CAS4+ programming specialists.

Note: Some CAS4/CAS4+ application illustrations show the compatible GODIAG GT100 breakout box. This package includes the GT100+ identified in the package list.
Communication Checks Before Reinstallation
Connect the CAS4/CAS4+ module to the platform before reinstalling it in the vehicle to check communication and investigate possible module faults using compatible equipment.

Data Reading, Backup and Module Replacement
With compatible programming equipment, the platform supports data reading and backup after the required preprocessing and supported CAS4/CAS4+ immobilizer module replacement. The supplied example is replacing a two-port CAS4 with a three-port immobilizer system with Comfort Access.
Note: The two-port to three-port Comfort Access replacement is a specific compatible application. It does not establish that all CAS4/CAS4+ modules are interchangeable.

Add-Key, All-Keys-Lost and Synchronization Testing
Before reinstalling the module, test whether the programmed key synchronizes with CAS4/CAS4+. For supported all-keys-lost work, the CAS4 module and corresponding ECU can be removed and sent to a locksmith for programming and synchronization testing. Adding a new key likewise requires the appropriate external programmer.
External programming-software example for a supported CAS4 key-learning procedure:

Mismatch Troubleshooting
If a key cannot start the vehicle, use the platform to help check whether the key and CAS4/CAS4+ module are mismatched.

Dedicated CAS4/CAS4+ Fast Connectors
The dedicated OEM-style CAS4/CAS4+ fast connector provides a convenient connection to the module.

CAS4/CAS4+ Platform Structure

- DB25 female connector — connects to the corresponding male port of GODIAG GT100 / GODIAG OBD2.
- Simulated ignition/start switch.
- Simulated immobilizer dashboard indicator.
- Key sensing area.
- Screw bolt.
- GODIAG dedicated CAS4/CAS4+ power or CAN communication adapter.
- GODIAG dedicated CAS4/CAS4+ start-control adapter.
Compatible External Programming Equipment
The source references CGDI, Xhorse VVDI2, BMW VVDI BIM Tool, Autel IM608, Yanhua ACDP, Tango and Lonsdor equipment for applicable CAS4/CAS4+ procedures.
Note: Confirm the exact CAS4/CAS4+ module, connected tool, software and required operation. The test platform provides connection and testing support; it does not perform programming or data-processing functions independently.
Warranty
GODIAG GT100+: one-year warranty.
Specifications
Specifications
| Parameter | Details |
|---|---|
| GT100+ display | Voltage and current |
| Diagnostic breakout | OBDII; 16-pin |
| ECU connections | Banana connectors; dedicated DB25 interface |
| Designated CANbus/K-Line indication pins | 1 / 9 / 3 / 11 / 12 / 13 / 8 |
| Module connections | Single or multiple ECUs |
| OBD2 cable length | Approximately 1.4 m; manufacturer specification |
| GT100+ operating temperature | −20°C to 70°C (−4°F to 158°F) |
| GT100+ storage temperature | −40°C to 85°C (−40°F to 185°F) |
| CAS4/CAS4+ platform connector | DB25 female |
| CAS4/CAS4+ controls and indication | Simulated ignition/start switch; immobilizer indicator; key sensing area |
| CAS4/CAS4+ module connections | Dedicated fast connector; power/CAN communication adapter; start-control adapter |
| External equipment | Compatible diagnostic/programming equipment and software required |
| GT100+ warranty | One year |
Product FAQ
Ask a questionWhat is included in the GODIAG GT100+ and BMW CAS4/CAS4+ kit?
This kit includes one GODIAG GT100+ OBDII breakout box, one BMW CAS4/CAS4+ test platform and the accessories in the package list, including one OBD2-to-DB25 cable. External key-programming equipment is not included.
Does the GT100+ display ECU voltage and current on the bench?
Yes. GODIAG specifies voltage and current display when the ECU is connected through the banana connectors or dedicated DB25 interface. Check the correct wiring for the selected module.
Can this kit perform BMW CAS4 all keys lost programming without another programmer?
No. The GT100+ and CAS4/CAS4+ platform provide connections and testing facilities. BMW CAS4 all keys lost or add-key procedures require compatible external programming equipment and the applicable software and module support.
Can the CAS4/CAS4+ platform work with Autel IM608 or Xhorse VVDI2?
GODIAG lists Autel IM608 and Xhorse VVDI2 among the external tools used with its CAS4/CAS4+ platform. Confirm the exact module, task and software authorization on the programmer before starting.
Can I check CAS4 key synchronization before reinstalling the module?
The GODIAG CAS4/CAS4+ test platform provides a bench check of synchronization between the programmed key and its module. It can assist mismatch troubleshooting, but does not establish that every vehicle start-related fault has been resolved.
Will this CAS4/CAS4+ bench test kit work with every BMW model?
Confirm that the vehicle uses a supported CAS4/CAS4+ module, then check the module connector and external programmer coverage. The kit does not establish universal BMW model-year or immobilizer-system compatibility.
How long is the GODIAG GT100+ OBD2 cable?
The manufacturer specifies an approximately 1.4-metre OBD2 cable for GT100+. Use the GT100+ specification when checking cable reach for this kit.
Customer reviews
Highest rated firstNo reviews yet.

