GODIAG
GT100
€73View details

The OBDSTAR DC706 Full Version bundle combines the ECU cloning tablet, P003+ adapter and MP001 kit for supported car and motorcycle ECM, TCM and body-module read/write and cloning, with module-specific connection methods for control-unit repair and replacement.
Standalone Android tablet for supported ECM, TCM and body-module data operations. Application-dependent OBD, Bench, Boot, BDM and JTAG workflows, using the connection method specified for the selected controller. This bundle includes the DC706 Full Version ECU Tool package, P003+ adapter and MP001 kit.
| Operating System | Android 5.1.1 |
|---|---|
| Storage | 16 GB |
| Display Size | 7-inch |
| Display Resolution | 1024 × 600 |
|---|---|
| Operating Temperature | -10°C to 55°C |
| Item | Qty |
|---|---|
| DC706 Full-Version ECU Tool package | 1 |
| P003+ Adapter | 1 |
| Item | Qty |
|---|---|
| MP001 Kit | 1 |
The full-version OBDSTAR DC706 ECU Tool is bundled with the P003+ Adapter and MP001 Kit for ECU programming and cloning. It supports ECM, TCM, and BCM modules across cars and motorcycles, with OBD-II and bench operation.
The MP001 programmer expands hardware capability and compatibility for next-generation ECUs.
ECU Cloning
Clones ECM, TCM, and body ECUs for multiple car and motorcycle brands for ECU replacement and repair.
Full Memory Read & Write
Reads and writes complete memory data, including EEPROM, D-Flash, P-Flash, and MAP data.
Advanced ECU Management
Resets ECUs to a virgin state, performs mileage calibration for supported TCM units, such as the Volkswagen DQXXX series, and recovers bricked or non-responsive ECUs.
IMMO PIN Retrieval
Extracts immobilizer PIN codes to support key programming and component adaptation tasks.
Dual-Mode Operation
Works through a standard OBD-II port or direct bench wiring to the ECU for on-vehicle and bench service workflows.
Smart ECU Identification
Searches by vehicle brand, model, part number, or MCU type, with automatic ECU detection.
Standalone Android Tablet
The DC706 main unit runs on Android OS and requires no external PC during operation.
Pairing the P003+ Adapter and MP001 Kit expands hardware performance and module coverage.
P003+ Adapter
MP001 Multifunctional Programmer
This full configuration supports ECM, TCM, and body-system operations across a wide range of car and motorcycle makes.
| Parameter | Details |
|---|---|
| Operating System | Android 5.1.1 |
| Storage | 16 GB |
| Display Size | 7-inch |
| Display Resolution | 1024 × 600 |
| Operating Temperature | -10°C to 55°C |
MP001 covers the P003+ adapter functions and provides additional hardware capability. OBDSTAR specifies that supported SIMOS18 ECU cloning requires MP001. This bundle includes both, but the adapter used for each operation must follow the selected DC706 application.
DC706 ECU cloning depends on the exact controller and supported replacement procedure. Reading EEPROM and Flash does not by itself establish that a donor ECU will work. Confirm hardware compatibility, required data processing and the available cloning function before writing.
DC706 DSG TCM cloning may require a dedicated transmission harness or connection accessories for the exact controller. Confirm the gearbox version and required equipment before ordering. P003+ and MP001 inclusion does not establish that every dedicated TCM cable is included.
No. DC706 supports application-dependent OBD, Bench, Boot, BDM and JTAG workflows. The correct access method depends on the controller and software entry. OBD support for one ECU does not establish the same connection method for another.
No. OBDSTAR identifies DC706 as an ECU Flasher platform. MP001 does not add separate IMMO key-programming, cluster-calibration or airbag-reset software. Reading an IMMO PIN or cloning a supported body module is different from providing those complete functions.
No. OBDSTAR specifies that MP001 works with compatible OBDSTAR host devices rather than connecting directly to PC software. In this bundle, the DC706 tablet provides the supported operating interface.
OBDSTAR's current DC706 update policy provides one year of free upgrades from device registration. An annual subscription applies from the second year. Confirm renewal pricing and any expiry-related service restrictions before purchase.
OBDSTAR currently lists English as the supported DC706 interface language. Do not assume that purchasing the Full Version or adding P003+ and MP001 provides a German-language interface.
No reviews yet.