DiagMaster
EU ShipFree Shipping

GT105 II ECU IMMO Prog AD Break Out Box ECU Connector + Full Protocol OBD2 Universal Jumper Breakout Tricore Cable

BrandGODIAGItem No. DC-GDG-ECU-000046Physical product

This set combines the GODIAG GT105 II ECU IMMO programming connection adapter with a full-protocol OBD2 universal jumper cable for supported vehicle and bench connections. GT105 II adds vehicle voltage display, CR2032 battery testing, a below-11V battery warning, Toyota steering angle matching support, and Lamborghini ID48 IMMO auxiliary activation. The jumper provides switchable PIN4/PIN5 grounds and simulated ignition control for supported ECU connections.

€36€40
In Stock
Quantity
1

Delivery & shipping options

Standard delivery
Free
Dispatch from
EU
Total incl. shipping:
€36
Estimated delivery
8–15 Working Days

Overview

Designed for automotive maintenance technicians, IMMO matching technicians, and ECU programming engineers, this set provides connection and power-routing support for compatible diagnostic and programming equipment. Applications include supported ECU reading, writing, cloning and tuning setups, IMMO auxiliary activation, communication-status indication, and drawing 12V power from a vehicle battery for on-site equipment use. GT105 II is a connection adapter used with appropriate tools; available functions depend on the vehicle, module, diagnostic equipment, and software.

Package list
Package contents for the selected product option, part 1 of 2
ItemQty
GT105 II host1
Power cord with battery clip1
Package contents for the selected product option, part 2 of 2
ItemQty
Full protocol OBD2 jumper1
Electrical resistance3

Description

GODIAG GT105 II with Full-Protocol OBD2 Universal Jumper Cable

This set combines the GODIAG GT105 II ECU IMMO programming connection adapter with a full-protocol OBD2 universal jumper cable for supported vehicle and bench connections. GT105 II adds vehicle voltage display, CR2032 battery testing, a below-11V battery warning, Toyota steering angle matching support, and Lamborghini ID48 IMMO auxiliary activation. The jumper provides switchable PIN4/PIN5 grounds and simulated ignition control for supported ECU connections.


Five Added GT105 II Functions

  • Vehicle voltage display.
  • CR2032 remote-control battery testing.
  • Low vehicle battery voltage warning: alarm prompt below 11V.
  • Toyota steering angle matching support.
  • Lamborghini ID48 key IMMO auxiliary activation.


ECU and Module Connections

The full-protocol OBD2 jumper provides connections for supported ECUs, immobilizer modules, ABS modules, airbag modules, and instrument clusters through appropriate OBD or bench setups.

  • Use with compatible programming equipment for supported ECU data reading, writing, cloning, and tuning.
  • ECU programming tools named in the supplied description include MPPS, FGTech, Kess V2, BYSHUT, and DISPROG.
  • Provide the required module connections and power connections for the selected diagnostic or programming setup.

Note: The adapter and jumper provide connection functions. A listed module category or tool name does not establish support for every module, software version, or operation.

Full-Protocol Jumper Features

  • Independent OBD2 grounds: PIN4 body ground and PIN5 signal ground.
  • GND4–5 switch: select linked or separate PIN4/PIN5 ground connections.
  • Simulated ignition switch: pressing the switch marked “ING” supplies 12V on the “ING12V” line in the described setup.
  • Ignition leads: one large and two small dedicated connections.
  • Boot ground: GND 4# clip.
  • Signal leads: double K-line and double CAN-line connections.
  • Power connections: three large and two small power plugs.
  • Ground connections: four large and four small GND connections.
  • Power interfaces: DC connection and protected banana-plug connection for a programming power supply.

Note: The supplied instructions specify the GND4–5 switch pressed and illuminated for linked grounds. Release it when the ECU connection requires PIN4 and PIN5 to remain separate. Follow the matching ECU connection diagram and programming tool prompts for ignition switching.

Power Cable and Connector Features

  • Battery power cable: 0.75 mm², two-core sheathed cable.
  • DC connector sizes stated: 5.5 × 2.5 mm and 5.5 × 2.1 mm.
  • DC connector protection: resettable 7A fuse.
  • Battery clip thickness stated: 0.5 mm.
  • Female connectors: pure copper contacts.
  • Dedicated laboratory DC power connection.

Communication Status Indicators

Communication indicators flash when activity is present on their corresponding lines. The supplied pin assignments are PIN2, CANH on PIN6, CANL on PIN14, and K-Line on PIN7.

Note: Indicator activity helps check whether communication signals are present; it does not by itself confirm that a diagnostic or programming operation completed successfully.

IMMO Auxiliary Activation and Matching Applications

  • Ford smart-key all-keys-lost: auxiliary support for the post-2016 applications described, used with compatible VVDI, OBDSTAR, AUTEL, or other IMMO matching equipment.
  • VAG: instrument or IMMO ECU wake-up for the described fourth- and fifth-generation IMMO workflows.
  • Toyota: ECU/IMMO synchronization and supported key matching workflows.
  • Mitsubishi: auxiliary support for all-keys-lost matching or remote-control key settings.
  • Older Porsche Cayenne: auxiliary support for IMMO key learning.

Note: These are application examples, not blanket coverage for every vehicle of the named brand or year. Follow the connected programming device’s vehicle-specific prompts for battery disconnection, external power, and key matching.

On-Site Power and Battery Replacement Support

Use the power cable to draw 12V power from a vehicle battery for compatible equipment during outdoor work. Equipment examples include Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, and compatible 12V-powered key cutting machines.

The supplied description also identifies battery replacement power-maintenance support, intended to help retain vehicle settings and ECU data while a suitable external supply remains connected.

Note: The set routes power from a connected supply; it is not described here as a standalone battery or charger. Power-maintenance use is not a guarantee that every vehicle will avoid setting loss, resets, warning lights, or fault codes.

Original Connection and Application Images

The following images are retained in their original order from the supplied product page.

Indicator Reference Images



Product FAQ

Ask a question

No product questions have been published yet. Need to check something before buying? Ask our team.

Customer reviews

Highest rated first

No reviews yet.

Chat with us