OBDSTAR
OBDSTAR MP001 Set Programmateur Multifonction
€269View details

The GODIAG Full Protocol OBD2 Jumper Breakout Tricore Cable connects ECU, IMMO, ABS, airbag, and instrument-cluster modules for supported OBD or bench work. It provides independent GND4/GND5 connections, a ground-joining switch, ignition simulation, a Boot GND4 clip, and dual K-line/CAN connections.
This jumper cable provides module connections for compatible diagnostic equipment, ECU/key programmers, airbag tools, and mileage programmers. Listed equipment includes Key Tool Plus, Autel IM608 II, Launch tablets, CGDI, OBDSTAR, MPPS, FGTECH, and KESS V2. Its switchable ground connections and simulated ignition supply support the described wiring requirements. Additional examples cover airbag-module operations and Mercedes-Benz EIS/EZS data reading with the specified tools.
| Module Applications | ECU; Immobilizer; ABS; Airbag; Instrument cluster |
|---|---|
| Power Connections | DC supply; dedicated banana-plug programming-power connection |
| Ground Connections | Independent GND4 and GND5; switchable joined-ground mode |
| Boot Connection | Boot GND4 clip |
|---|---|
| Communication Lines | Dual K-lines; dual CAN lines |
| Ignition Simulation | Switch-controlled 12 V on the IGN12V lead |
| Item | Qty |
|---|---|
| Full Protocol OBD2 Jumper | 1 |
| Item | Qty |
|---|---|
| Electrical Resistance | 3 |
The GODIAG Full Protocol OBD2 Jumper Cable provides OBD or bench connections to ECU, immobilizer, ABS, airbag, and instrument-cluster modules. It is used with compatible diagnostic tools, ECU/key programmers, airbag reset tools, and mileage programmers for the supported operation.
Note: The cable provides the connection. Available diagnosis, programming, repair, reset, and coding functions depend on the connected tool and the specific module.
Note: The GND4–5 switch is normally pressed and illuminated for the joined-ground mode. Release it when the ECU procedure requires GND4 and GND5 to remain independently connected.
Note: These connector labels are retained as supplied. They are not a complete vehicle/ECU coverage list; confirm the connector and pin assignment for the required application.





Connect to supported airbag tools such as OBDSTAR P50, Carprog, iProg, Launch X431, or Autel equipment for the diagnosis, reset, repair, or coding operation supported by that tool and module.



Works with the listed Xhorse VVDI MB Tool or CGDI MB for supported Mercedes-Benz EIS/EZS data-reading connections. The supplied description lists this cable as an alternative to the Benz EIS/EZS adapter set for those connection applications.

Press the ignition simulation switch to supply 12 V on the corresponding IGN12V lead. Use the switch when the connected programming equipment prompts you to turn ignition power ON or OFF.
The original wiring illustration labels the ignition switch as ING; the ignition lead is labelled IGN12V.
| Parameter | Details |
|---|---|
| Module Applications | ECU; Immobilizer; ABS; Airbag; Instrument cluster |
| Power Connections | DC supply; dedicated banana-plug programming-power connection |
| Ground Connections | Independent GND4 and GND5; switchable joined-ground mode |
| Boot Connection | Boot GND4 clip |
| Communication Lines | Dual K-lines; dual CAN lines |
| Ignition Simulation | Switch-controlled 12 V on the IGN12V lead |
No product questions have been published yet. Need to check something before buying? Ask our team.
No reviews yet.