DiagMaster
EU ShipFree Shipping

OBDSTAR G3 Full Version Key Programmer with Cluster Calibration, ECU Flasher, Crash Reset and Test Platform

BrandOBDSTARItem No. DC-OBD-KPGR-000053Physical product

OBDSTAR G3 Full Version combines one G3 programming tablet with IMMO and the Cluster Calibration, ECU Flasher, Crash Reset and Test Platform software activations for supported vehicle and module applications.

€2,882€3,199
In Stock
Quantity
1

Delivery & shipping options

Standard delivery
Free
Dispatch from
EU
Total incl. shipping:
€2,882
Estimated delivery
8–15 Working Days

Overview

OBDSTAR G3 Full Version brings key programming, transponder and EEPROM/MCU operations, cluster calibration, ECU flashing/cloning, crash reset and component testing onto one G3 tablet. Built-in CAN FD, DoIP, fault-tolerant CAN, RFID, remote testing and OBD16 pinout switching support its programming workflows. Specific functions follow the official coverage for the selected vehicle and module.

Specifications

Specification summary, part 1
Operating systemAndroid 11
ProcessorQuad-core 64-bit Cortex-A55, 2.0GHz
Memory4GB RAM + 64GB storage
Battery9000mAh polymer lithium-ion battery
Specification summary, part 2
Display8-inch fully laminated sunlight-readable capacitive touchscreen
Display resolution1280 × 800 pixels
Rear camera8 megapixels, autofocus
Wi-FiDual-band 2.4GHz / 5GHz

Showing 8 of 22 specifications

Package list
Package contents for the selected product option
ItemQty
G3 Full Version kit: G3 main unit, MP001 programmer, P004 adapter, charger and cables12V2A charger; M001; W004; W005; C4-01; C4-02; BENCH-A V3; P004 Jumper (C1024); BENCH-B V2; jumper wire set (six specifications); 3-in-1 jumper; KeySim + USB-to-Type-C cable (gift).1

Software & licences

Included entitlement
G3 IMMO functions plus Cluster Calibration, ECU Flasher, Crash Reset and Test Platform software activations for OBDSTAR G3 Full Version

Description

OBDSTAR G3 Full Version Programming Tool

OBDSTAR G3 Full Version combines one OBDSTAR G3 with IMMO and the Cluster Calibration, ECU Flasher, Crash Reset and Test Platform software activations for supported vehicle and module applications.

The G3 integrates the selected functions in one programming platform. Its Full Version software modules do not add separate P50, DC706 or ODO MASTER tablets to the product.

Full Version Software Configuration

  • IMMO: key programming, remote testing, ECU Advanced, key/transponder operations, EEPROM/MCU read/write and key renewal.
  • ODO METER: car and motorcycle cluster calibration, plus oil/service reset.
  • ECU Flasher: car ECM, car TCM, car body systems and motorcycle ECM.
  • Crash Reset: battery-module reset (MVBM), airbag reset and SAS reset.
  • Test Platform: dashboard, E-car ABS, gear lever, A/C panel, E-car BSG, E-car MHEV, E-car audio and E-car EBA.

Vehicle Categories

The official G3 range covers programming applications for cars, heavy-duty vehicles, electric cars, motorcycles and marine jet-skis. Available procedures are defined by the vehicle, module and software coverage.

G3 vehicle categories: car, HD, electric car, motorcycle and marine jet-ski

Key, Transponder and ECU Operations

  • IMMO/key programming and remote-frequency testing.
  • Read/write transponders, generate dealer and start keys, renew keys and unlock supported smart keys.
  • Read/write EEPROM and MCU data.
  • ECU unlocking, ECU Advanced and supported OBD II operations.

G3 key, transponder and ECU programming functions

Official Application Examples

  • Car IMMO: MQB all-keys-lost procedures for proximity and blade keys; Ford/Lincoln 2021 key programming; Nissan Sentra B18 and Rogue T33 all-keys-lost procedures.
  • Motorcycle IMMO: PIN-free programming for covered Harley, Triumph, Ducati, Kawasaki, Honda, Suzuki, Yamaha, BRP, Indian, Dayang, Aprilia, Piaggio, Vespa, Derby, Girella, Guzzi, Peugeot and Itajet applications.
  • Marine/jet-ski IMMO: covered BRP, Kawasaki and Yamaha applications.
  • Electric-car IMMO: covered LI, NETA, Leapmotor, Seres and AITO applications.
  • ECU unlocking: covered Alfa Romeo, Fiat, Chrysler, Dodge and Jeep applications.
  • SMART 453: programming solutions for the listed all-keys-lost cases with disabled functions.
  • Renault all-keys-lost applications: CITY K-ZE, KWID, SANDERO, TRAFIC, TWINGO, LODGY and DUSTER PH3.
  • Renault/Samsung PIN reading: listed post-2015 Espace, Kadjar, Koleos, Megane, Scenic, Talisman, QM6 and SM6 applications.

G3 immobilizer and key programming applications

Integrated Communication and Tablet Hardware

CAN FD, DoIP, low-speed fault-tolerant CAN, OBD16 pinout switching, RFID and remote testing are built into G3. The Renault converter function is also integrated.

The tablet uses Android 11, a quad-core 64-bit Cortex-A55 2.0GHz processor, 4GB RAM and 64GB storage. Its 8-inch fully laminated capacitive touchscreen has a 1280 × 800 resolution. Dual-band Wi-Fi, Bluetooth 5.0, HDMI and USB connectivity support workshop use.

Optional Hardware for Specific Procedures

Special procedures use their designated hardware. The BENZ FBS3 kit, RH850/V850 adapter kit, P005 adapter kit, C4-07 adapter kit, C4-09 adapter kit, ECM-003 harness and dedicated motorcycle/car cables are listed by OBDSTAR as optional accessories. Full software activation does not include every optional accessory.

  • BENZ FBS3: supported PIN reading, key programming, ECU virginization and personalization for ECM/TCM/ISM/EIS/ELV.
  • VW4-AKL (C1002): supported VW IMMO IV NEC24C64 and NEC24C32 all-keys-lost work.
  • Toyota-30 (C1023): covered 4A, 8A-BA and 8A-B9 key programming and specified dashboard calibration applications.
  • TCM connectors and dedicated Bench cables: supported transmission data operations using the matching connection.
  • C4-07: covered Mercedes-Benz VGS4-0-NAG2 TCM virginization via JTAG and personalization/data transfer via Bench or OBD.
  • ECM-003: listed BMW B48/B57/B58 ECU data read/write and ISN-read applications.

Programming Scope and Coverage

G3 is aimed at locksmith and automotive electronics programming work. OBDSTAR states that it does not include the diagnostic and maintenance functions of KEY MASTER DP PLUS, apart from Manual Service Lamp Reset.

The official G3 Full coverage archive lists the available vehicle and module applications. Use the matching on-device procedure and wiring instructions for each operation.

Software activation is included in this Full Version configuration; update subscriptions and future software releases are separate terms.





Specifications

ParameterDetails
Operating systemAndroid 11
ProcessorQuad-core 64-bit Cortex-A55, 2.0GHz
Memory4GB RAM + 64GB storage
Battery9000mAh polymer lithium-ion battery
Display8-inch fully laminated sunlight-readable capacitive touchscreen
Display resolution1280 × 800 pixels
Rear camera8 megapixels, autofocus
Wi-FiDual-band 2.4GHz / 5GHz
BluetoothBluetooth 5.0
External interfacesRJ45, HDMI, USB Type-A, USB Type-C, TF card slot, main cable connector, DC charging connector
Expansion memoryMicro SD / TF card up to 32GB
Working temperature-10°C to 55°C (14°F to 131°F)
Storage temperature-20°C to 70°C (-4°F to 158°F)
Device weightApproximately 1.5kg
Device dimensions270.5 × 165 × 35mm
CAN FDBuilt in
DoIPBuilt in
Low-speed fault-tolerant CANBuilt in
OBD16 pinout switchingBuilt in
RFIDBuilt in
Remote testingBuilt in
Renault converterBuilt in

Product FAQ

Ask a question
What software functions are included in OBDSTAR G3 Full Version?

OBDSTAR G3 Full Version combines one G3 programming tablet with IMMO functions and the Cluster Calibration, ECU Flasher, Crash Reset and Test Platform software activations.

Does the Full Version include separate P50, DC706 or ODO MASTER tablets?

No. These are software functions on the G3 platform. OBDSTAR G3 Full Version is supplied as one G3 Full Version product, not a bundle of those separate tablets.

Which vehicle categories does G3 cover?

The official G3 range covers listed car, heavy-duty vehicle, electric-car, motorcycle and marine jet-ski programming applications. Each function applies to the vehicles and modules in the official coverage list.

Are CAN FD, DoIP and RFID built into G3?

Yes. G3 has built-in CAN FD, DoIP, low-speed fault-tolerant CAN, OBD16 pinout switching, RFID and remote-testing functions.

Does full software activation include every optional adapter and cable?

No. The official G3 accessory charts list dedicated motorcycle IMMO cables, the BENZ FBS3 kit, RH850/V850 adapter kit and other vehicle-specific adapters or cables as optional accessories for the procedures that require them.

Does G3 include every diagnostic and maintenance function of KEY MASTER DP PLUS?

No. OBDSTAR states that G3 does not include the diagnostic and maintenance functions of KEY MASTER DP PLUS, except Manual Service Lamp Reset.

Where can I find the supported vehicle and function lists?

The official OBDSTAR G3 product page provides the user manual and coverage downloads in its Function Manual section. Use the KEYMASTER G3 COVERAGE (FULL) download for the Full Version.

Customer reviews

Highest rated first

No reviews yet.

Chat with us