OBDSTAR
OBDSTAR G3
β¬1,260View details

The GODIAG GT105 II is an ECU/IMMO connection adapter for supported IMMO auxiliary activation, diagnostic and programming connections, and drawing 12V power from a vehicle battery for on-site equipment use. Compared with GT105, it adds vehicle voltage display, CR2032 battery testing, a below-11V battery warning, Toyota steering angle matching support, and Lamborghini ID48 IMMO auxiliary activation.
GT105 II provides OBD2 connection and power access for compatible diagnostic and key programming equipment, with separate PIN4 body-ground and PIN5 signal-ground connections and communication-activity indicators. It supports the supplied auxiliary IMMO application examples and battery-replacement power-maintenance connections. An optional full-protocol OBD2 ECU programming cable enables additional bench ECU connections with suitable programming tools; that cable is purchased separately.
| Remote-control battery test | CR2032 |
|---|---|
| Low-voltage warning | Below 11V |
| Lamborghini function named | ID48 key IMMO auxiliary activation |
| On-site power source | 12V vehicle battery |
|---|---|
| Additional power application | Compatible 12V key cutting machines |
| Item | Qty |
|---|---|
| GT105 II host | 1 |
| Item | Qty |
|---|---|
| Power cord with battery clip | 1 |
The GODIAG GT105 II is an ECU/IMMO connection adapter for supported IMMO auxiliary activation, diagnostic and programming connections, and drawing 12V power from a vehicle battery for on-site equipment use. Compared with GT105, it adds vehicle voltage display, CR2032 battery testing, a below-11V battery warning, Toyota steering angle matching support, and Lamborghini ID48 IMMO auxiliary activation.
Note: Indicator activity helps check communication signals. It does not by itself confirm successful diagnosis, programming, or module repair.
Note: These are auxiliary application examples, not complete vehicle coverage. Key programming and ECU operations require compatible equipment and software support for the actual vehicle or module.
The GT105 II power adapter cable draws 12V power from the vehicle battery for compatible equipment during outdoor work. The supplied equipment examples include Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, and IM608, including supported BMW / Mercedes-Benz IMMO ECU and other ECU workflows.
It can also supply compatible 12V-powered key cutting machines from the connected battery.
Note: This describes power access from a connected vehicle battery. No regulated output specification, battery-charging capability, or independent stored power is established in the supplied material.
With the appropriate full-protocol OBD2 ECU programming cable, connect supported ECUs for data reading, writing, cloning, or tuning using compatible tools such as MPPS, FGTech, and Kess V2.
The supplied connection-line highlights describe independent PIN4 / PIN5 grounds and selection between linked and separate grounds for special programming requirements.
Note: The full-protocol OBD2 ECU programming line is purchased separately. Its connection features must not be taken as confirmation that the cable is included with the GT105 II product.
GT105 II provides a connection for maintaining an external power supply during battery replacement, intended to help retain ECU data, IMMO information, and vehicle settings that could otherwise be affected by a power interruption.
Note: The source lists retaining clock, audio, IMMO, window, and throttle settings as intended benefits. These are not presented as guarantees that every vehicle will avoid resets, warning lights, fault codes, or key relearning.



| Parameter | Details |
|---|---|
| Remote-control battery test | CR2032 |
| Low-voltage warning | Below 11V |
| Lamborghini function named | ID48 key IMMO auxiliary activation |
| On-site power source | 12V vehicle battery |
| Additional power application | Compatible 12V key cutting machines |

No product questions have been published yet. Need to check something before buying? Ask our team.
No reviews yet.