GODIAG
G-V ECU Cable
€14View details

GODIAG GT107 DSG gearbox adapter bundled with the GT105 ECU IMMO programming adapter and full-protocol OBD2 jumper cable. Provides gearbox and ECU connections for compatible external programmers, with separate PIN4/PIN5 grounding options, power connections, simulated ignition control, and listed gearbox-specific read/write operation support.
This bundle combines the GODIAG GT107 gearbox adapter, GT105 ECU IMMO programming adapter, and OBD2 Jumper Breakout Tricore Cable. GT107 provides connections for supported DSG gearbox diagnosis, cloning, reading, writing, and data-adjustment workflows using compatible tools such as PCMFlash, PCMTuner, and KESS V2. GT105 provides ECU power and grounding connections with a resettable 7A fuse. The jumper cable supports OBD2 bench connections, independent or bridged GND4/GND5, simulated ignition control, dual K-line/dual CAN-line connections, and CAN communication resistance. Available operations depend on the gearbox/ECU, connection mode, and external programmer.
| Item | Qty |
|---|---|
| GODIAG GT107 DSG Gearbox Data Read/Write Adapter with GT105 | 1 |
| Item | Qty |
|---|---|
| GODIAG Full Protocol OBD2 Jumper Cable | 1 |
This bundle combines the GODIAG GT107 gearbox adapter, GT105 ECU IMMO programming adapter, and OBD2 Jumper Breakout Tricore Cable. GT107 provides connections for supported DSG gearbox diagnosis, cloning, reading, writing, and data-adjustment workflows using compatible tools such as PCMFlash, PCMTuner, and KESS V2. GT105 provides ECU power and grounding connections with a resettable 7A fuse. The jumper cable supports OBD2 bench connections, independent or bridged GND4/GND5, simulated ignition control, dual K-line/dual CAN-line connections, and CAN communication resistance. Available operations depend on the gearbox/ECU, connection mode, and external programmer.
Note: Programming devices and software mentioned below are compatibility examples, not additional bundled components.
Note: This bundle provides connection and power-routing hardware. The external programmer and software determine the operations available for the selected ECU or gearbox.
GT107 is a DSG gearbox connection adapter. Used with compatible programming equipment, it supports gearbox ECU cloning, diagnosis, repair workflows, data reading/writing, and supported data adjustment.
Listed tool examples include PCMFlash, PCMTuner, KESS V2, and KTMBench. GT105 provides the related ECU programming power and grounding connections.
Additional Listed Connections
Gearbox-Specific Operations
Boot / BSL Operations
Operation codes: RD = reading; WR = writing; CK = checksum operation.
Note: The listed operation codes apply to the specified gearbox and mode. Do not assume an unlisted read or checksum function is supported. Renault/Honda entries identify listed connections without additional operation codes. Software authorization and the exact connection setup must match the intended operation.
Note: 7A is the stated resettable-fuse rating. It is not a supplied power-adapter output specification.
The jumper cable connects supported ECUs to compatible programming equipment through an OBD2 bench setup.
Note: Pressing the GND4–5 switch so that it lights bridges GND4 and GND5. Release the switch when the ECU procedure requires independent GND4 and GND5 connections. Use the state required by the exact ECU and programmer.
GT107 Gearbox Workflows
PCMFlash, PCMTuner, KESS V2, and KTMBench, subject to supported gearbox functions.
OBD2 Jumper Bench Connections
MPPS, FGTECH, KESS V2, BYSHUT, DISPROG, and PCMTuner. OBDSTAR P50 is also listed for compatible jumper-cable connection use.
Note: The jumper cable connection example for OBDSTAR P50 does not mean that P50 performs DSG gearbox programming. Tool compatibility depends on the required pinout, connection method, and supported module operation.





GT107 can be used in supported Mercedes-Benz 7G gearbox and BMW 6HP EGS renewal workflows with compatible CGDI / VVDI equipment.
Note: Renewal capability depends on the exact gearbox module and the selected CGDI / VVDI device and software. GT107 is the connection adapter, not an independent renewal programmer.
Bundle & Application
GT105 Hardware
OBD2 Jumper Cable
No product questions have been published yet. Need to check something before buying? Ask our team.
No reviews yet.